How to connect to a limited WiFi connection - A Hacking Trick

Everyday we find many WiFi connections.

• Some are protected by passwords and
• Some have limited connection problem.

If you want to crack the WiFi password then you should ready my previous tutorial
link: Click Here

Now i this tutorial i will be showing you that how you can connect to a limited WiFi connection. As we know WiFi connections have no security so we can easily connect our self to a limited WiFi connection also. I have tested this trick myself with a WiFi connection which was in my range and i was able to connect myself to it but it was giving limited connectivity problem. Then after this, I tried an experiment and it was successful, Yes i was able to use that WiFi. Actually the WiFi was used by someone i.e Admin or some other people who were connected to it, And what i did was that i sniffed the MAC address of the admin who was actually using that WiFi and was connected to it. After this i spoofed my MAC address to his MAC address as a result we both were having same MAC Address and at that time i was using his WiFi like a boss.

Now if you want to do the same trick then just follow my steps.
Turn your Kali Linux on, And then open terminal and type the following command.

airmon-ng start waln0

Now we have to sniff the MAC Address of the person(admin) connected to that WiFi so simply scan the network by airodump tool which is used to sniff MAC addresses so for this type the following command.

airodump-ng mon0

Now i hope that you will have many WiFi access points in your range. So below the AP Names thier is "stations" which show the list of active clients on the network and also shows their MAC address as you can see in the screenshot below.

Now we got the MAC Addresses of the active clients on that network now we are going to spoof our MAC address to his one so we both can have same MAC address and we could use his Internet. First make you MAC address down in order to spoof your MAC address with the admin of the WiFi. So for this type the following command

ifconfig wlan0 down

now next we to spoof the MAC address type the following command

ifconfig wlan0 hw ether MAC-Address

And replace MAC-Address with the MAC address of that admin. In my case the MAC address of admin is F0:CB:A1:2A:FB:62.

now after this we will up our MAC Address so type.

ifconfig wlan0 up

Now we will again setup the interface by the following command

airmon-ng start wlan0

Finally we are done to connect to the WiFi and i am 100% sure that you will be connected to your network with this trick.

Don't forget to share this tutorial with you friends. And also do comment.

NOTE: 

This is only for educational purpose, Don't try this because hacking is an illegal act.

 Try it and comment below if it works for you.

• Tweet
• Share
• Share
• Share
• Share

Sign up here with your email